SMD Soldering at home



Most hobbyists are working on small kits layouts .And prefer the through hole
parts.After the projects id done the board looks bulky and needs more space to fit.
Never possible to make card size boards... build needs lott of wiring and connecting
wires .

I suggest why not explore SMD.Yes sourcing components is an issue ,you can use sites
like mouser.com for parts .. before getting into details lets learn Smd soldering at home.
Here are some videos you can refer:

open youtube go through related videos !
Tools needed ,
just tweezers , and a fine tip soldering iron,and a liquid flux.
For pcb try iron on pcb fabrication.

Comments

  1. AnonymousOctober 13, 2009 at 10:57 PM

    Thank you ! I successfully made my first SMD diy circuit with your help


    -mett

    ReplyDelete
  2. AnonymousOctober 13, 2009 at 10:58 PM

    good one ...how do i solder
    SSOP? am making an audio DAC
    -Richard

    ReplyDelete

Post a Comment

Popular posts from this blog

Image
schematic Quickpost this image to Myspace, Digg, Facebook, and others! code working: If you press any button in the matrix keyboard it controller will scan the corresponding ascii code that will send serially to the port pin specified . Corresponding ascii code we can see in LED blinkings. #include /* add the headers here */ #define COL P2 #define ROW P1 void msdelay(unsigned int value); void sertx(unsigned char); unsigned char keyboard[4][4]={ '7','8','9','/', '4','5','6','*', '1','2','3','-', 'a','0','=','+' }; void main() { unsigned char colloc,rowloc; TMOD=0x20; TH1=-24; SCON=0x50; TR1=1; COL=0xff; while(1) { do { ROW=0x00; colloc=COL; colloc&=0x0f; } while(colloc!=0x0f); do { do { msdelay(20); colloc=COL; colloc&=0x0f; }while(colloc==0x0f); msdelay(20); colloc=COL; colloc&=0x0f; } while(colloc==0x0f); while(1) { ROW=0xfe; colloc=COL; colloc&a
Read more

8051 Development Setup:MIDE-51 Installation

1. Installing MIDE-51 MIDE-51 is freeware Integrated Development Environment (IDE) for MCS-51 microcontroller. The full package already comes with: Assembler : ASEM-51 by W.W.Heinz (v1.3)C compiler : SDCC: Small Device C Compiler (v2.5.4)Simulator : TS Controls 8051 Emulator v1.0 evaluation (Owner : http://www.tscontrols.com was gone)Simulator : JSIM-51 Simulator by Jens Altmann (v4.05) Just downloads midepack0258.exe and executes this file, everything will setup completely. Feature on MIDE-51: Syntax highlighter on ASEM-51 reserved word & addition register on selected device (devices listed on ASEM51/MCU folder) Syntax highlighter on SDCC reserved word & MCS-51 standard register Support multi document workspace Support standard editor feature and shortcut key such as Cut , Copy, Paste, Find, Replace and Windows tile & cascade Editor font style and size selectable Save recent file(s) opened in list Shortcut to ASEM-51 html manual Shortcut to SDCC html & PDF manual
Read more

Nokia dot Matrix LCD Interfacing with 89c51( 8051 core)

Image
The Nokia 3310 LCD is based on a PCD8544 48x84 pixels matrix LCD controller Pin Diagram given above .. Schematic: ---------------------------- AT89C51 PROGRAM CODE ;Program for Nokia 3310 LCD PCD8544 48x84 pixel SCK BIT P1.7 SDIN BIT P1.6 D_C BIT P1.5 SCE BIT P1.4 RES BIT P1.3 ORG 0000H AJMP MAIN ORG 0030H MAIN: MOV SP,#60H MOV P1,#00H CLR C CALL RESET CALL LCD_INIT HERE: CALL CLEAR_RAM MOV DPTR,#MESSAGE CALL LCD_STRING CALL DELAYS CALL CLEAR_RAM MOV DPTR,#IMAGE CALL DISPLAY CALL DELAYS AJMP HERE DELAYS: ;1s DELAY MOV R5,#10 D1: CALL DELAY DJNZ R5,D1 RET DELAY: ;100ms DELAY SETB PSW.4 MOV R7,#200 HDH: MOV R6,#100 HD: NOP NOP NOP DJNZ R6,HD DJNZ R7,HDH CLR PSW.4 RET RESET: ; RESET SETB SCE SETB RES CLR RES CALL DELAY SETB RES RET LCD_INIT: ;INITALIZE LCD MOV DPTR,#LCDCODE1 CALL LCD_IN CALL CLEAR_RAM MOV R1,#00H ;Y MOV R2,#00H ;X CALL CURSOR RET LCD_IN: MOV A,#00H MOV R6,#00H LOOP3: INC R6 MOVC A,@A+DPTR CJNE A,#2FH,NEXT3 RET NEXT3: CALL LCD_COM MOV A,R6 AJMP LOOP3 DISPLAY: ;DISPLAY IMA
Read more